Hitachi CG 22EAS(S) Trimmer User Manual


 
6
Model
Grass Trimmer Brush Cutter Grass Trimmer Brush Cutter
CG24EAS (SL) CG24EAS (S) CG27EAS (SL) CG27EAS (S)
Engine Size (ml) 23.9 26.9
Spark Plug NGK BMR7A or equivalent
Fuel Tank Capacity (l) 0.52
Dry Weight (kg) 4.6 4.9 4.9 5.1
Sound pressure level
LpA (dB (A))
(EN27917)
Equivalent
92 92 93 93 93 95
Measured sound
power level LwA
(dB (A))
(ISO10884)
Equivalent
105 105 105 107 107 107
Measured sound
power level LwA
(dB (A))
(2000/14/EC)
Racing
108 108 108 110 110 110
Guaranteed sound
power level LwA
(dB (A))
(2000/14/EC)
Racing
111 111 111 111 111 111
Vibration level (m/s
2
)
(ISO7916)
Equivalent (Front / Left handle)
Equivalent (Rear / Right handle)
Idling (Front / Left handle)
Idling (Rear / Right handle)
Racing (Front / Left handle)
Racing (Rear / Right handle)
6.2
5.8
4.2
3.1
7.7
7.6
3.7
4.7
2.6
4.4
4.6
5.0
8.4
6.5
2.6
4.4
11.6
8.2
6.2
7.4
3.1
2.0
8.3
10.4
4.8
4.0
2.8
3.9
6.2
4.1
8.6
6.1
2.8
3.9
11.9
7.6
NOTE
Equivalent noise level/vibration level are calculated as the time-weighted energy total for noise/vibration levels under various working
conditions with the following time distribution: 1/2 Idle, 1/2 racing.
* All data subject to change without notice.
ASSEMBLY PROCEDURES
Drive shaft to engine (Fig. 1)
Loosen tube locking bolt (1) about ten turns so that the bolt point will
not obstruct drive shaft tube to be inserted. When inserting drive
shaft tube, hold the tube locking bolt outward preventing inside
tting from obstructing as well.
Insert the drive shaft into the clutch case of the engine properly until
the marked position (2) on the drive shaft tube meets the clutch
case.
Some models may come with the drive shaft already installed.
1
2
Fig. 1