Filter
Top Products
396007AMT1004020
1.141.14
STARTING THE ENGINE
BEFORE STARTING THE ENGINE Continued.
Fuel recommendations: Always use clean, fresh unleaded
petrol. Purchase fuel in quantities which can be used within
30 days. Never mix oil with petrol. For added engine protec-
tion Briggs & Stratton recommend the use of their fuel addi-
tive which is available from an authorised Briggs & Stratton
service dealer.
Check fuel level: Clean around the fuel filler cap before
removing and fill the fuel tank with clean unleaded petrol.
Do not overfill the fuel tank. Allow 6mm minimum of tank
space for fuel expansion.
IMPORTANT: The fuel filler cap must be secured to pre-
vent fuel leakage during operation.
WARNING - PREVENT ACCIDENTS: The cutterbar
rotates when the engine is operating.
ALWAYS operate the engine stop lever several times and
ensure the engine stop cable moves freely before starting the
engine.
ALWAYS position the mower on a level stone free grass sur-
face before starting the engine. Ensure that the cutterbar is set
above grass height to prevent the engine being started under
load.
6mm
minimu
m
CS036
CS037