Filter
Top Products
To prevent accidents stop the engine and disconnect the spark
plug lead before attempting to carry out maintenance proce-
dures on the mower.
1. Air Cleaner
2. Cover
3. Fuel Cap
4. Start Grip
5. Oil fill/Dipstick
6. Exhaust Guard
7. Exhaust
8. Carburettor
9. Spark Plug / Lead
Loosen casing clamp screw (1) and move the governor lever (2) in
the direction of screw (1) as far as possible. Move the throttle
control to the choke position. Tighten casing clamp screw.
Should only be made by an authorised Briggs & Stratton dealer.
Under no circumstances should the engine be adjusted to run at a
speed in excess of that shown on the Declaration of Conformity.
1.21
MOWER
9
8
6
7
5
4
3
2
1
1
2
Engine
Throttle Cable Adjustment
Carburettor Adjustments
MAINTENANCE
111-1475 (A) 6/12/07 9:52 am Page 1.21