Filter
Top Products
To engage the cutterblade hold the cutterblade stop lever against the
handlebar with your right hand and with your left hand push the blade
brake clutch lever forwards to engage. Release the blade brake clutch
lever and it will return to its rest position.
Hold the handlebar and operate the ground drive clutch lever to power
the mower in a forward direction.
When the ground drive clutch lever is disengaged the mower may be
pushed. This feature is useful when mowing in confined areas.
If the cutterblade stop lever is released the cutterblade will stop.
To make a wide turn steer the mower with the handlebar in the direc-
tion required.
To make a tight turn release the ground drive clutch lever, apply down-
ward pressure on the handlebar to raise the front wheels just above
ground level and steer in the required direction.
To prevent accidents do not raise the front of the mower exces-
sively when making a turn. Never raise the rear of the mower
when the engine is running.
Release both ground drive clutch lever and the cutterblade stop lever.
Pull the throttle lever to the rear most position.
Emergency stop If the engine fails to stop, disconnect the spark
plug lead.
1.15
Forward Travel
Turning
OPERATING THE MOWER
Stopping
STOP
CS146
Step 4
485114 (1) 7/7/04 12:02 pm Page 1.15