Hayter Mowers 445E Lawn Mower User Manual


 
Setup
Unfolding the Handle
1. Unlock the handle locks, move the handle sections
into the operating position, and lock the handle locks
(Figure 3).
Figure 3
2. Unlock the upper handle locks and rotate the upper
handle upward and lock it into a position that is
comfortable to you (Figure 4).
Figure 4
1. Highest position 3. Lowest position
2. Middle position
Note: You can set the upper handle to 1 of 3 handle
positions. Line up the mark to one of the 3 marks on
the inner side of the upper handle locks (Figure 4).
Note: If a handle lever is loose, open the lever,
rotate it clockwise 1 or 2 turns to tighten it, then
close the lever (Figure 5).
Figure 5
Filling the Engine with Oil
Your mower does not come with oil in the engine.
1. Remove the dipstick (Figure 6).
Figure 6
2. Slowly pour oil into the oil ll tube until the oil
level reaches the Full line on the dipstick (Figure 6).
Do not overll. (Max. ll: 0.59 l, type: SAE 30W
detergent oil with an API service classication of SF,
SG, SH, SJ, SL, or higher.)
3. Install the dipstick securely.
Important:
Changetheengineoilaftertherst
5operatinghours
; change it yearly thereafter.
Refer to Changing the Engine Oil.
6