Filter
Top Products
OPERATOR SAFETY
4
1739579
OWNER’S INFORMATION
Know your product: If you understand the
unit and how the unit operates, you will get
the best performance. As you read this manu-
al, compare the illustrations to the unit. Learn
the location and the function of the controls.
It is important that you read and understand
these original instructions thoroughly before
attempting to start or operate this equipment.
WARNING: Look for this symbol to indi-
cate important safety precautions. This
symbol indicates: “Attention! Become
Alert! Your Safety Is At Risk.”
Responsibility Of The Owner
WARNING: This cutting machine
is capable of throwing objects.
Failure to observe the following
safety instructions could result in serious
injury to the operator or bystanders.
The responsibility of the owner is
to follow the instructions below.
SAFETY PRECAUTIONS
I. General Operation
1. Read, understand, and follow all instruc-
tions on the machine and in the manu-
al(s). Be thoroughly familiar with the
controls and the proper use of the ma-
chine before starting.
2. Familiarize yourself with all of the safety
and operating decals on this equipment
and on any of its attachments or acces-
sories.
3. Do not put hands or feet near or under
rotating parts.
4. Only allow responsible individuals, who
are familiar with the instructions, to oper-
ate the machine.
5. Thoroughly inspect the area where the
machine is to be used and remove all
foreign objects. Your equipment can
propel small objects at high speed caus-
ing personal injury or property damage.
Stay away from breakable objects, such
as house windows, automobiles, green-
houses, etc.
6. Keep the area of operation clear of all
persons, particularly small children, and
pets.
7. Wear appropriate clothing such as a
long−sleeved shirt or jacket. Also wear
long trousers. Do not wear shorts.
8. Do not wear loose clothing or jewelry.
They can be caught in moving parts.
9. Always wear safety goggles or safety
glasses with side shields when operating
the machine to protect your eyes from
foreign objects which can be thrown
from the unit.
10. Always wear work gloves and sturdy
footwear. Wear footwear that will im-
prove footing on slippery surfaces. Do
not operate product when barefoot or
wearing open sandals. Leather work
shoes or short boots work well for most
people. These will protect the operator’s
ankles and shins from small sticks, splin-
ters, and other debris.
11. It is advisable to wear protective head-
gear to prevent the possibility of being
struck by small flying particles, or being
struck by low hanging branches, twigs,
or other objects which may be unnoticed
by the operator.
12. Do not operate the machine without
proper guards or other safety protective
devices in place.
13. Use this
equipment for its intended pur-
pose only.
14
. See manufacturer’s instructions for prop-
er operation and installation of accesso-
ries. Only use accessories approved by
the manufacturer.
15. Operate only in daylight or good artificial
light.
16. Do not operate product when fatigued or
under the influence of alcohol, drugs or
other medication which can cause
drowsiness or affect your ability to oper-
ate this machine safely.
17. Never operate machine in wet grass. Al-
ways be sure of your footing; keep a firm
hold on the handle and walk; never run.
18. Before each use, inspect the throttle
control lever and cable. Make sure that
the cable is free and that the lever is not
damaged. Also check the cable linkage
running to the carburetor for kinks, loose
fittings, and obstructions. Verify that the
control bail is working properly.
19. Stop the rotating trimmer head when
crossing gravel drives, walks, or roads.
Wait for the cutting lines to stop rotating.
20. Watch for traffic when operating near, or
when crossing roads.