Filter
Top Products
ASSEMBLY
8
F-050202L
ASSEMBLY
CONTENTS OF PARTS BAG
1 - Owner’s Manual
1 - Parts Bag
1 - Safety Glasses
(Not shown actual size)
2 Sets - Trimmer Lines
(0.155 inch diameter)
1 - Bag (4 Screws)
WARNING: Always wear safety
glasses or eye shields while as-
sembling the machine.
TOOLS REQUIRED
1 - Knife to cut carton.
1 - T-Handle Wrench.
Figure 1 shows the machine completely as-
sembled and positioned in the carton for ship-
ment.
References to the right or left hand side of the
machine are from the viewpoint of the opera-
tor’s position behind the unit.
TO REMOVE THE
TRIMMER FROM CARTON
1. Remove the parts bag and any loose parts
from carton.
2. Remove the packing material positioned
around the unit.
3. Cut down all four corners of the carton and
lay the side panels flat.
4. Pull the trimmer out of the carton and off
the base pad.
5. Remove packing material from around the
trimmer head.
6. Remove protective plastic from front of
frame.
Figure 1