Filter
Top Products
ASSEMBLING THE MOWER
1.12
Remove the mower from the packaging and check that the following
items have been supplied correctly. If any items are missing contact,
your local Hayter dealer.
1. Engine Handbook. 2. Grassbag.
3. Owners Handbook
To prevent accidents cut off the long ribbon attached to the grass-
bag and discard.
Unscrew the handlebar securing knobs sufficiently to allow the handle-
bar to pivot. Hold the engine stop lever in towards the handlebar and
unfold the handlebar to the operating position, before releasing. Tighten
both handlebar knobs to secure in position.
Take care to ensure that the control cables do not become snagged at
the pivot point.
Using a suitable spanner or socket. Loosen the 2 fixings at the base of
the handlebars. Unscrew the 2 lower knobs sufficiently to allow han-
dlebars to pivot. Set the required position and re-tighten the 2 lower
knobs, check position and re-tighten the fixing screws at the base of
the handlebar.
Raise the rear deflector, lower the grassbag through the handlebar and
hook in position. Lower the deflector to rest on the grassbag
HAYTER
CS089
Handlebar
Delivery Checklist
Grassbag Attachment
CS275
Adjust Height of Handlebars
398016 (0) 10/3/05 11:38 am Page 1.12