Filter
Top Products
1.11
Forward Travel
Position the mower on the grass area to be cut. Carefully uncoil the
supply cable clear of the mower. Ensure that the mains socket is
switched 'OFF' before connecting. Switch 'ON'.
Note: We recomend the use of a RCCB unit- Refer to "Safety
Precautions" - Preparation.
Locate the bail arm lever mounted on the handlebar and ensure that
your feet are clear of the mower deck. Depress the safety button with
the right hand and pull the bail arm towards the handlebar with the left
hand. The motor will now start.
Hold and push against the handlebar with both hands to move the
mower forwards.
To make a wide turn steer the mower with the handlebar whilst travel-
ling forward.
To make a tight turn apply downward pressure on the handlebar to
raise the front wheels of the mower just above ground level and steer
the mower using the handlebar in the required direction.
To prevent accidents do not raise the front of the mower exces-
sively when making a turn. Never raise the rear of the mower
when the motor is running.
MOWERTHEOPERATING
Turning
Starting
Electrical Connection
111-0444(A) 19/1/06 8:55 am Page 1.11