Havis-Shields C-TCB-7-IMP Telescope User Manual


  Open as PDF
of 2
 
C-TCB-7-IMP-INST-12-04
SUB ASSEMBLY:
1. Confirm receipt of all hardware and components.
2. Install Chevrolet Impala Specific C-Series-IMP Consolidator® into vehicle using hardware
and instructions provided.
3. Determine location on console to mount C-TCB-7-IMP and be sure to leave room on
passenger side of console to mount.
INSTALLATION:
1. Mount C-TCB-7-IMP on side of Chevrolet Impala Specific C-Series-IMP console.
• Position C-TCB-7-IMP on Passenger side of console.
• Attach to lower rail of console first.
• Position spacer bracket between C-TCB-7-IMP and C-Series-IMP console.
• Align nuts in rails to slotted holes on pole support assembly.
• Attach pole support assembly and spacer bracket to console using ¼-20 x ¾” Hex
head bolts, washers and nuts with in the console rail.
• Now attach top of C-TCB-7-IMP using only ¼-20 x ½” Hex head bolts, washers and
nuts with in console rail.
Note: Rails of console have (4) ¼-20 hex nuts on both top and bottom. (Extra nuts are
provided if needed)
• Attach optional C-3090 Computer mounting platform to Telescoping pole assembly.
C-TCB-7-IMP mounted
on a C-1400-IMP console
(sold separately)
 previous