Filter
Top Products
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES AND PRECAUTIONS
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create
SKU 95091 For technical questions, please call 1-800-444-3353 PAGE 2
Item Description
Electrical
Requirements
120 VAC / 60 Hz / 3400 RPM
Power Switch: Rocker Switch with Safety Key
Power Cord: 14 AWG x 3 C (SJT) / 5’3” Long
Power Plug: 3-Prong / Grounded
Maximum Limb
Capacity
Up to 1-1/4” Diameter
Feed Inlet Size 5-1/2” Long x 1-1/2” Wide
Hopper Opening
Size
14-1/2” Long x 10-3/4” Wide
Wheel Type Solid Rubber with Plastic Hub
6-1/4” Diameter x 1-3/8” Wide
Cutter Blade Single Blade Chipper Wheel
3-1/8” Long x 1-3/8” Wide
Overall Dimensions 19-5/8” Long x 14-1/4” Wide x 37-7/8” High
Net Weight 28 Pounds