Filter
Top Products
SKU 94979 For technical questions, please call 1-800-444-3353 PAGE 7
INSPECTION, MAINTENANCE, AND CLEANING
1. CAUTION! Make sure to wear ANSI approved safety impact goggles and
heavy work gloves before performing any inspection, maintenance, or cleaning of
the Hand Chain Saw.
2. Before each use: Inspect the general condition of the Hand Chain Saw.
Check for misalignment or binding of moving parts, damaged or loose parts, dull
Chain, and any other condition that may affect the tool’s safeoperation. If a
problem occurs, have the problem corrected before further use.
Do not use damaged equipment.
3. Always keep the Chain clean and sharp. Keep the Chain well oiled to prevent
rust. Use lightweight machine oil or similar weight oil for best results. Until the
Chain needs replacing, sharpen the Chain as you would a conventional saw
chain with a 5/32” file (not included).
4. To clean: Use a clean, soft, damp cloth and mild detergent to clean the Hand
Chain Saw. Then, allow to air-dry. Do not use solvents.
5. When storing: Always store the Hand Chain Saw in a safe, dry, clean location
out of reach of children and other unauthorized people.
6. CAUTION! All maintenance, service, and repairs not discussed in this
manual should only be performed by a qualified service technician.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST
AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEI-
THER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR
WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO
REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACE-
MENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS,
AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISKS AND LIABILITY ARIS-
ING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACE-
MENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF
REPLACEMENT PARTS THERETO.