Harbor Freight Tools 91523 Portable Generator User Manual


 
PRODUCT SPECIFICATIONS
SKU 91523 PAGE 2
.
Item Description
VAC
Electrical Requirements
Current Output: 110/120 Volts @ 20 AMP’s
60 Hz
Continuous/Rated Wattage: 2600
Peak Wattage: 2800
Two 110/120 VAC, 3-Prong Grounding Outlets
One 23 AMP Circuit Breaker
VDC
Electrical Requirements
Current Output: 12 VDC @ 10 AMP’s
Voltmeter Equipped 0-150 Volts (50 Volt Increments)
Display Lights Red (Run)
Gasoline Engine 6.5 / Unleaded Gasoline Powered / Recoil Start
3600 RPM / 4-Cycle / OHV Air Cooled
196 CC Displacement
0.63 Quart (0.6 Liter) Oil Capacity
EPA Approved
Fuel Tank Capacity 3.96 Gallons (15 Liters) / Includes Fuel Gauge
Estimated Run Time 7.8 Continuous Operating Hours
Approx. Weight 112 Pounds
This product requires oil and fuel to be added before starting. Attempting to
start the engine without oil WILL ruin the engine and void the warranty.
BEFORE starting the engine, refer to the engine owner’s manual for engine
maintenance information.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, operating, inspec-
tion, maintenance and cleaning procedures, parts list and assembly diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front cover.
Keep this manual and invoice in a safe and dry place for future reference.
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts Lists on pages
18 and 20 are included. If any parts are missing or broken, please call Harbor Freight
Tools at the number shown on the cover of this manual as soon as possible.
CAUTION: THIS GENERATOR IS NOT INTENDED TO POWER SENSITIVE ELECTRONIC
EQUIPMENT (INCLUDING MEDICAL EQUIPMENT) WITHOUT THE ADDITION OF AN APPROPRIATE
LINE CONDITIONER (SOLD SEPARATELY).