Filter
Top Products
SKU 91377 For technical questions, please call 1-800-444-3353. Page 7
12. Only use 3-prong (125 VAC) or 4-prong (240 VAC), grounded extension cords.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the operator.
FIRST AID FOR ELECTRIC SHOCK
1. Do not touch the victim’s skin with bare hands until the source of the electricity has
been turned off.
2. Turn the generator off.
3. Pull the plug or hot cable away from the victim using an insulated material.
4. Stand on dry insulating material and pull the victim clear of the conductor, preferably
using insulated material such as dry wood or an insulated hook.
5. Once the victim is free of the electric current, check for breathing. If not breathing,
perform CPR and keep the victim warm. Have someone call the paramedics.
GROUNDING
Warning: This generator must be grounded to earth ground before using. Refer to the
photo at the top of the next page.
WARNING
Improperly connecting the grounding wire can result in the risk of electric
shock. Check with a qualied electrician if you are in doubt as to whether the outlet is
properly grounded. Do not modify the power cord plug provided with the tool - Never
remove the grounding prong from the plug. Do not use the tool if the power cord or
plug is damaged. If damaged, have it repaired by a service facility before use. If the
plug will not t the outlet, have a proper outlet installed by a qualied electrician.
Generator Ground
Terminal
Connect a # 6 AWG solid copper wire from the ground terminal to an earth grounding point.
Grounded Tools: Tools with Three Prong Plugs
1. Tools marked with “Grounding Required” have a three wire cord and three prong
grounding plug. The plug must be connected to a properly grounded outlet. If the tool