Filter
Top Products
SKU 65439 For technical questions, please call 1-800-444-3353. Page 4
Optional Tongue Mount Installation Instructions
NOTE: None of the mentioned fasteners are supplied with this item.
Set the trailer box on the trailer tongue, and position it where you want to mount it. See illustration 1.
below.
To mark the hole location in the trailer box, place masking under the box in the location where the 2.
U-bolts will go through the box. Put ink on the tips of each U-bolt and press it into position marking
the tape under the tailer box.
Turn the trailer box upside down and drill out the holes.3.
NOTE: Drill the holes the same diameter as the bolt diameter.
Secure the Trailer box to the Trailer Tongue using at least two U-bolts and other hardware shown in 4.
illustration below. Lock nuts are recommended for this installation. Do not tighten the nuts yet.
Slide the box against a cross member on the trailer. Attach the back of the trailer box to it using 5.
sheet metal screws or bolts and nuts. Tighten all of the bolts and screws.
WARNING:6. You must secure the back of the box to a cross member of the trailer to assure that the
box will not twist while on the road.
Trailer Tongue
Trailer Box
Screw into cross
member of trailer.
Screw into cross
member of trailer.