Filter
Top Products
SKU 65309 For technical questions, please call 1-800-444-3353. Page 8
BASIC SPECIFICATIONS
PTO Operating
Speed
540 RPM
PTO Power At Least 25 HP
Output Shaft
1-3/8” diameter shaft with
6-tooth spline
Rated
Continuous
Output
15,000 Watts
Rated Maximum
Output
16,000 Watts
Phase 1 (single) phase
Receptacles
12 VDC, 8 A, 2-prong outlet•
2 X 125 V~, 20 A, duplex •
GFCI outlets (5-20R)
125 V~, 30 A 3-blade twist •
lock outlet (L5-30R)
125/250 V~, 50 A 4-prong •
outlet (14-50R)
UNPACKING
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
Included components:
Generator unita.
PTO shaftb.
PTO guardc.
SET UP INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
STARTING:
Turn the Power Switch of the
equipment to its “OFF”
position, wait for the engine to
cool, and disable the engine
before assembling or making
any adjustments to the
equipment
TO PREVENT
SERIOUS INJURY
FROM ELECTRICAL SHOCK:
A licensed electrician must do
all installation work, including
earth-ground connection.
Keep this generator and all
electrical wires, cords and
components dry.
Note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
1. Attach the PTO (power Take-Off)
Shield to the Generator using the
supplied bolts and washers. Ad-
just and tighten securely, as shown
above.