Grizzly T23108 Chainsaw Sharpener User Manual


  Open as PDF
of 40
 


Top Plate Cutting
Angle
Figure 26
        
       


Top Plate
Cutting
Angle
Figure 26.

         


Note: Always refer to the chain manufacturer's
specifications when setting up the sharpener.
However, if this information is not available, use
the chart in Figure 22 on Page 20 as a general
guide.
To set the grinding wheel tilt for the top plate
cutting angle:
1. 
2.       
Figure 27
3. 
       
     


     

Note: There is also the same angle scale on
the inside vertical face of the base.
Figure 27.



 previous next