Filter
Top Products
-5-
T10042 26" Lawn Sweeper
Figure 15. Brush assembly (end view).
With extensive use, the brushes on the Model
T10042 may become worn and require replace
-
ment.
To replace the brushes:
1. Tilt the sweeper all the way forward to allow
easy access to the brushes. For the sake of
simplicity, only replace one brush at a time.
2. Remove the lock nuts and hex bolts indicated
in Figure 15, and remove the old brushes.
It is not necessary to remove the bolts and
nuts connecting the brush holder to the brush
shaft.
3. Install the new brush, making sure the over-
lap bristles are properly oriented in relation
-
ship to the direction of brush rotation, as
shown in Figure 15. Tighten the hex nuts.
Brush
Rotation
Brush
Rotation
Remove
Overlap Bristles