Filter
Top Products
GB - 5
1 & 2. DANGER
Read the operator’s manual.
Keep children and others away from unit while
operating.
Never direct discharge toward other people.
Thrown objects can cause injury.
Look down and behind before and while
backing.
Keep children out of work area and under
watchful care of a responsible adult.
Never carry children.
Go up and down slopes, not across.
Disengage PTO before tilting deck upward.
•Never allow operation by untrained
persons.
• If machine stops going uphill, stop blade and back
down slowly.
• Avoid sudden turns.
• Keep safety devices (guards, shields, switches,
etc.) in place and working.
• Check interlock system per manual before use.
• Understand location and function of all controls.
3. HOT SURFACES!
DO NOT touch parts which are hot from
operation. ALWAYS allow parts to cool.
4. DANGER!
PINCH POINT
ASSEMBLY SAFETY RULES
Read, understand, and follow all safety practices in
Owner/Operator Manual before beginning assembly.
Failure to follow instructions could result in personal
injury and/or damage to unit.
ALWAYS remove key and/or wire from spark plug before
assembly. Unintentional engine start up can cause death
or serious injury.
OPERATIONAL SAFETY RULES
Walk Around Inspection
Complete a walk around inspection of unit and work area
to understand:
• Work area • Your unit • All safety decals
Work Area
ALWAYS check overhead and side clearances carefully
before operation. ALWAYS be aware of traffic when
operating along streets or curbs.
Keep children and people away. Keep children out of
work area and under watchful care of a responsible adult.
Keep area of operation clear of all toys, pets, and debris.
Thrown objects can cause injury.
Check for weak spots on dock, ramps or floors. Avoid
uneven work areas and rough terrain. Stay alert for
hidden hazards.
Avoid uneven and rough terrain. DO NOT operate near
drop offs, ditches, or embankments. Unit can suddenly
turn over if a wheel is over the edge of a cliff or ditch, or if
an edge caves in.
Personal Safety
Data indicates that operators, age 60 and above, are
involved in a larger percentage of riding mower related
injuries. These operators should evaluate their ability to
operate the riding mower safely enough to protect
themselves and others from serious injury.
Only trained adults may operate unit.
Training includes actual operation.
NEVER allow children to operate or play on or near unit.
Be alert and shut off unit if children enter area.
NEVER operate unit after or during the use of
medication, drugs or alcohol. Safe operation requires
your complete and unimpaired attention at all times.
DO NOT wear loose clothing or jewelry and tie back hair
that may get caught in rotating parts.
Wear adequate outer garments.
NEVER wear open sandals or canvas shoes during
operation. Wear adequate safety gear, protective gloves
and footwear.
Wear proper footwear to improve footing on slippery
surfaces.
Always wear safety goggles or safety glasses with side
shields when operating mower.
Moving parts can cut or amputate fingers or a hand.
Wrap blade(s) or wear gloves to service.
IMPORTANT:
On multi-blade mowers, rotation of one
blade will cause all blades to rotate.
OL1801
OL4140
OL0910
OL4780
OL4790
OL4800
10°
10°
MAX
OL4770
OL4820
OD0061
OL4830