GB - 5
DO NOT try to stabilize the machine by putting your
foot on the ground.
Know the weight of loads. Limit loads to those you can
safely control and the unit can safely handle.
ALWAYS keep protective structures, guards and panels
in good repair, in place and securely fastened.
DO NOT operate in reverse unless absolutely
necessary. ALWAYS look down and behind before and
while backing.
Watch for holes, ruts, or bumps. Uneven terrain could
overturn the machine.
ALWAYS allow adequate clearance for unit,
attachments, operator and objects in work area when
turning. Slow down before turning.
NEVER carry passengers.
Hazardous Slopes
If you cannot back up a slope or you feel uneasy on it,
do not mow it.
Mow up and down slopes, not across them.
Keep all movements on the slope
slow
and
gradual.
DO NOT make sudden changes in speed or direction.
Avoid starting or stopping on a slope. If tires lose
traction, disengage the blades and proceed slowly
straight
down the slope.
DO NOT operate on slopes over 10˚.
DO NOT park on slopes unless absolutely necessary. If
you must park on a slope, always chock or block
wheels. Always set parking brake.
Transport
Use extra care when loading or unloading unit onto
trailer or truck.
Secure unit chassis to transport vehicle. NEVER
secure from rods or linkages that could be damaged.
DO NOT transport machine while engine is running.
ALWAYS turn off power to attachment when
transporting.
MAINTENANCE AND SERVICE SAFETY
RULES
Disengage PTO, stop engine, remove key and wait for
all moving parts to stop before servicing, making
repairs, adjusting or when clearing debris.
ALWAYS block wheels. Know all jack stands are
strong, secure and will hold weight of unit during
maintenance.
ALWAYS keep protective structures, guards, and
panels in good repair, in place and securely fastened.
NEVER modify or remove safety devices.
Fumes from engine exhaust can cause injury or death.
DO NOT run engine in an enclosed area. Always
provide good ventilation.
Keep unit free of grass, leaves, or other debris. Clean
up oil or fuel spills.
Check grass can and catcher parts prior to each use
for any holes, abrasions, mildew, or structural damage.
Replace parts when necessary.
Keep all hardware properly tightened.
Cleaning
Keep unit free of debris. Clean up oil or fuel spills.
STORAGE SAFETY RULES
DO NOT store grass can with grass in them.
For extended storage, clean unit thoroughly. See
Engine Manual for proper storage.
ALWAYS lower cutting deck when unit is parked or
stored.
FUEL SAFETY RULES
Fuel is highly flammable and its vapors are explosive.
Handle with care. Use an approved fuel container.
NO smoking, NO sparks, NO flames. ALWAYS allow
engine to cool before servicing.
NEVER fill fuel tank when engine is running or hot from
operation.
NEVER fill or drain fuel tank indoors.
Replace fuel cap securely and clean up spilled fuel.
ACCESSORY AND ATTACHMENT SAFETY
RULES
Use only attachments or accessories designed for your
unit and properly installed.
Check attachment components frequently. If worn or
damaged, replace with manufacturer’s recommended
parts.
Grass catcher components are subject to wear,
damage, and deterioration, which could expose moving
parts or allow objects to be thrown. Frequently check
components and replace with manufacturer’s
recommended parts, when necessary.