Filter
Top Products
WARNING
HIGH
PRESSURE SPRAY
CAN
CAUSE SERIOUS INJURY.
FOR PROFESSIONAL
USE
ONLY. OBSERVE ALL
WARNINGS.
Read and understand all instruction manuals before operating equipment.
FLUID
INJECTION
HAZARD
This pressure washer generates very high
fluid
General Safety
pressure. Spray from
the
gun,
leaks or ruptured
your body and cause extremely serious bodily injury
components can inject fluid through your skin and into
including the need for amputation.
Also,
fluid injected or
splashed into the eyes or on the skin can cause serious
damage.
NNER
point the spray gun or wand at anyone or at any
part of the body.
NNER
put hand
or
fingers over the
spray tip.
ALWAYS
follow the Pressure Rellef Procedure, before
cleaning or servicing any part of the sprayer.
NNER
try to stop or deflect leaks with your hand or
body.
Be sure equipment safety devices are operating
properly before each use.
Medical Treatment
If
any fluid appears to penetrate your skin, get
EMERGENCY
MEDlCALTREATMENTATONCE.DO
what fluid was injected.
NOT TREAT AS A SIMPLE
CUT.
Tell
the doctor exactly
traumatic
injuv.
It
is
Important
to treat
the
Injury
NOTE TO PHYSICIAN: Injection
in
the skin is
a
surgically
as
soon
as
posslble.
Do
not delay
treatment to research toxicity Toxicity is
a
concern with some exotic coatings injected
plastic surgeon or reconstructive hand surgeon
directly into the bloodstream. Consultation with a
may be advisable.
Pressure Relief Procedure
To
reduce the risk of serious bodily injury, including
fluid
injection and splashing in the eyes or on the skin,
sprayingfor more than
10
minutes, when shuttingdown,
always follow this procedure whenever you stop
and before checking or repairing any part of the system.
1.
Engage the trigger safety latch.
2.
Tum the sprayer
off.
3.
Remove the ignition cable from the spark plug.
4.
Shut
off
the water supply.
5.
Disengage the trigger safety latch and trigger the
gun to relieve pressure, and then engage the trigger
safety latch again.
6.
Before long-term (overnight) storage or
transporting of the unit, disconnect the water supply
and disconnect the fuel supply.
Be sure all gun safety devices are operating properly
Spray
Gun
Safety
Devices
the gun; this can cause a malfunction and result
in
before each
use.
Do
not remove or modify any part of
sefious bodily injury.
SAFETY
LATCH:
Whenever you stop spraying for a
moment, always set the gun safety latch
in
the engaged
or "safe" position, making the gun inoperative. Failure
to
triggering of the gun.
properly
set
the safety latch can result in accidental
SPRAY
TIP
SAFEPI:
Use extreme caution when
cleaning or changing spray tips.
If
a spray tip clogs
while spraying, engage the gun safety latch
immediately.
ALWAYS
follow the Pressure Relief
Procedure and then remove the spray tip
to
clean
it,
2
308-528