Filter
Top Products
~A~~~~~
HIGH PRESSURE SPRAY CAN CAUSE SERIOUS INJURY.
FOR
PROFESSIONAL
USE
ONLY.
OBSERVE
ALL WARNINGS.
Read and understand all instruction manuals before operating equipment.
FLUlD
1NJECTlON
HAZARD
General Safety
This pressure washer generates very high fluid
pressure. Spray from the gun, leaks or tuptured
components can inject fluid through your skin and into
your body and cause extremely
serious
bodily injury
splashed into the eyes or on the skin can
cause
serious
including the need for amputation. Also, fluid injected or
damage.
NNER
point the spray gun or wand at anyone or at any
part of the body.
NNER
put
hand or fingers over the
spray tip.
ALWAYS
follow the
Pressure Relief Procedure,
before
cleaning or servicing any part of the sprayer.
NNER
try
to
stop or deflect leaks with your hand or
body.
Be sure equipment safety devices are operating
properly before each
use.
Medical Treatment
If
any fluid appears to penetrate your skin, get
NOT TREAT AS
A
SIMPLE CUT.
Tell
the
doctor exactly
EMERGENCY MEDICALTREATMENTATONCE.
DO
what fluid was injected.
traumatic
injug It
Is
Important to
treat the
InJury
NOTE
TO
PHYSICIAN
injection
in
the
skin
is
a
surgically as
soon
as possible.
Do
not delay
treatment
to
research toxiciv. Toxicify
is
a
concern
with
.some
exotic- coatings injected
direct& into
the
bloodstream. Consultation
wirb
a
plastic
surgeon
or
reconstructive
hand
surgeon
may be advisable.
Pressure Relief Procedure
To
reduce the risk of serious bodily injury, including fluid
injection and splashing
in
the eyes or on the skin,
always follow this procedure whenever you stop
spraying for more than
10
minutes, when shutting down,
and before checking or repairing any part of the system.
1.
2.
3.
4.
5.
6.
Engage the trigger safety latch.
Thm
the sprayer
off.
Disconnect the electrical supply.
Shut
off
the water supply.
Disengage the trigger safety latch and trigger the
gun to relieve pressure, and then engage the trigger
safety latch again.
Before long-term (ovemighi) storage, disconnect
the water supply and disconnect the electricity.
Spray Gun Safety Devices
Be
sure
all gun safety devices are operating properly
the gun; this can cause a malfunction and result in
before each
use.
Do not remove or modity any part of
serious bodily injury.
moment, always set the gun safety latch in the engaged
SAFEIY
LATCH:
Whenever you stop spraying for a
or"safe" position, making thegun inoperative. Failureto
properly
set
the safety latch can result in accidental
triggering of the gun.
SPRAY
TIP
SAFm.
Use
extreme caution when
while spraying, engage the gun safety latch
cleaning or changing spray tips. If a spray tip clogs
immediately.
ALWAYS
follow the
Pressure
Relief
Procedure
and then remove the spray tip to clean it.
2
308-535