Filter
Top Products
Installation Instructions
NOTE: For 262326 (4043 BD) units, skip to step 6.
1. Remove hex plug from the pump manifold using the
wrench size listed in table 1.
2. Install tapped hex plug (4) supplied with kit and torque
to the specification in Table 2.
3. Remove pressure gauge from elbow fitting.
4. Remove elbow fitting from the pump.
5. Install pressure gauge in the tapped valve cover.
6. Install the bleeder valve (1) into the pump in the previ-
ous pressure gauge location. For 4043 BD units the
plug must be removed prior to installing the bleeder
valve.
ti17842a
ti17843a
ti17844a
ti17845a
ti17846a
ti17847a