Filter
Top Products
7
- Before carrying, lifting or removing the mower.
- If you leave the mower unattended or change the
cutting height.
- After hitting a foreign object, stop the engine and check
thoroughly the mower in order to see if it is damaged.
Take the mower to an authorized service centre to carry
out any repairs if necessary.
- If the mower vibrates in an abnormal way, take the
mower to an authorized service centre.
- Check the bolts and nuts regularly. Bolts and nuts may
vibrate loose over time.
WARNING: Fuel is highly flammable.
• Keep fuel in a jerry can specially made for this purpose.
• Fill the fuel tank with a funnel and outside. Do not smoke
or use a mobile phone during this process.
• Fill with fuel and oil before starting the engine. Never
open the cap of the fuel tank to add gasoline while the
engine is running or still hot.
• Do not start the engine if there is spilt fuel on the mower
or in the area surrounding. Take the mower away from
the zone where fuel has been split and avoid any
contact from a hot source as long as the split gasoline is
completely evaporated.
• Tighten the fuel tank cap and jerry can cap tightly.
Unpacking
Due to modern mass production techniques, it is unlikely
that your GMC Power Tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
Contents of carton
• Handle bar locking knobs, (including 2 bolts)
• Plastic 60L catcher