Global Machinery Company PB26CC Blower User Manual


 
4
Safety rules for petrol blowers
Training
Read the instructions carefully. Get familiar with the
controls and proper use of the equipment.
Only use the blower for the purpose for which it was
designed, i.e. blowing garden debris. Any other use
can be hazardous, causing damage to the machine.
Never allow children or people unfamiliar with these
instructions to use the blower. Local regulations may
restrict the age of the operator.
Never use the blower:
– When people, especially children, or pets are nearby.
– If the operator has taken medicine or substances that
can affect his ability to react and concentrate.
Remember that the operator or user is responsible
for accidents or hazards occurring to other people or
their property.
Do not use unit around people with long hair.
Dress appropriately do not operate with loose
clothing ensure there is a gap between the air
intake and the operator.
Preparation
While blowing, always wear sturdy footwear and long
trousers. Do not operate the equipment with bare feet
or open sandals.
WARNING: DANGER! Engine fuel is highly flammable:
– Store fuel in containers specifically designed for
this purpose.
– Refuel using a funnel and outdoors only. Do not smoke
while re-fuelling or whenever handling the fuel.
– Add fuel before starting the engine. Never remove
the cap of the fuel tank or add fuel while the engine is
running or when the engine is hot.
– If fuel is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and
avoid creating any source of ignition until the fuel has
evaporated and the vapour dispersed.
– Replace all fuel tanks and containers caps securely.
Substitute faulty silencers.
Before use, always inspect the machine and check
that the screws are not worn or damaged.
It is advisable to wear suitable eye protection when
operating the blower.
Maintenance and storage
Keep all nuts, bolts and screws tight to be sure the
equipment is in safe working condition. Regular
maintenance is essential for safety and performance.
Never store the equipment with fuel in the tank inside
a building where vapour may reach a flame or a
spark or a source of extreme heat.
Allow the engine to cool before storing in an
enclosed space.
To reduce the fire hazard, keep the engine, exhaust
silencer, battery compartment (if applicable) and fuel
storage area free of grass, leaves, or excessive grease.
If the fuel tank has to be drained, this should be done
outdoors and when the engine is cool.
For reasons of safety, do not use the equipment with
worn or damaged parts. Parts are to be replaced and
not repaired. Parts that are not of the same quality can
damage the equipment and be dangerous for your safety.
Fuel goes off fairly quickly. If you find your blower
does not start, 1st change the fuel in the tank with newly
purchased fuel.
Service
Have your power tool serviced by a qualified repair
personnel using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Operation safety instructions
WARNING. Stop the engine and unplug the spark plug
before any repairs or maintenance operations.
Check that all nuts, bolts and screws are well
tightened before every use.