❍
❍
❍
❍
❍
❍
❍
❍
❍
10 OVER-HEAD VALVE engine gives you 20% smaller and lighter weight,
than less efficient side valve engines. OHV design also reduces fuel and
oil consumption by 40%, gives you up to 10% more torque, has internal bal-
ancing for smooth operation and eliminates the need to constantly de-car-
bon engine cylinder head.
11 CAST IRON CYLINDER SLEEVE gives you longer engine life than stan-
dard side valve aluminum engines.
12 AUTOMATIC OIL SENSOR protects your engine from low oil and auto-
matically stops engine before damage happens.
13 SOLID STATE IGNITION allows trouble-free operation with no points or
condenser to replace.
14 2-ELEMENT HEAVY-DUTY AIR CLEANER adds major additional
engine life by trapping more dust and dirt.
15 ROPE-RECOIL STARTING is easy and simple with its unique automat-
ic compression release.
16 EXTENDED RUN 4 GALLON fuel tank with filter, valve and fuel gauge,
allows up to 12 hours continuous run on 3 kw to 7.5 kw sets.
17 EXTENDED RUN 8 GALLON fuel tank with filter, and fuel gauge, allows
up to 9 hours continuous run on 9 kw to 15 kw sets.
18 COBALT EXHAUST VALVE AND SEAT adds major additional service
life hours. (Vanguard and Kohler)
19 SEPARATE SPIN-ON OIL FILTER and full pressure oil lubrication for
longer life. (9-15 kw)
20 BUILT-IN 2 WHEEL DOLLY with new, full pneumatic 10” tires for easy
transport of larger 9-15 kw gasoline gen-sets.
● 180 amp DC weld capacity at 100% duty cycle.
● 6000 watts maximum power, 5500 watts continuous AC
power for additional job-site work.
● Rugged Honda 13 hp electric start gasoline engine for
dependable, quiet operation.
● Control panel: Hourmeter, (4) GFCI protected 120 volt
receptacles, load circuit breakers, welding rheostat knob, (1)
240 volt receptacle, and high temp shut down indicator light.
● Unique WELD-PRO features: Convenient elec-
trode decal positioned on control panel for fast “stick” selection to
match the welding job; solid state control board for near-perfect
weld control; separate cooling fan for longer component life;
high temperature shut-down and low oil shut-down pro-
tection.
● Ask your dealer for complete WELD-PRO specifications.
FOR THOSE WHO WANT AND NEED THE VERY BEST, GEN-PRO GENERATORS GIVE
YOU AN ALL USA MADE, HEAVY DUTY GENERATOR WITH QUALITY FEATURES.
✔ 1 EXCLUSIVE “KLEEN-POWER”™ design allows
only 7% harmonic distortion of the power sine-wave.
Harmful harmonic distortions over 10% may do damage
to your plugged-in electric load.
✔ 2 EXCLUSIVE “POWER-ASSIST”™ design allows
27% more copper wire and electrical grade steel than
leading competitor gen-sets. This gives you huge, extra
starting power for hard starting electric motor loads.
✔ 3 EXCLUSIVE, HEAVY-DUTY DIODES give you “Life-
Time” warranty from failure on the most commonly
replaced part on other generator sets.
✔ 4 EXCLUSIVE, HEAVY-DUTY CAPACITOR gives you
“Life-Time” warranty from failure on the second most com-
monly replaced part on other gen-sets.
✔ 5 EXCLUSIVE, AUTOMATIC LOAD BALANCE elimi-
nates load chatter and excessive vibration due to unbal-
anced electric loads.
6 “MAGNETIC” CIRCUIT BREAKERS automatically pro-
tect windings from overloads and “short circuited” electric
loads.
7 GROUND FAULT CIRCUIT INTERRUPTERS (GFCI)
receptacle helps protect operator from electric shock and
provides OSHA/NEC compliance on the construction job-
site.
8 VOLTMETER allows easy review of correct voltage out-
put.
9 RUN TIME METER totals the hours of run time for serv-
ice or rental use.
GILLETTE MFG. INC., 1340 WADE DRIVE, ELKHART, INDIANA, 46514
TELEPHONE: (574) 264-9639 FAX: (574) 262-1840
HEAVY DUTY, LONG LIFE GEN-PRO GENERATORS
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
Model WP-180EH
✔ ❍ = EXCLUSIVE ONLY WITH GEN-PRO GENERATORS
FEATURES AND BENEFITS
NEW WELD-PRO WELDER GENERATOR SET