Filter
Top Products
Part No. 43650 Genie S-80 & Genie S-85 13
Operator's ManualSecond Edition · Fifth Printing
MAINTENANCE
Deutz F4L 1011F Engine
Oil capacity (including filter) 8.5 quarts 8 liters
Oil viscosity requirements
below 60°F / 15.5°C (synthetic) 5W-30
-10°F to 90°F / -23°C to 32°C 10W-40
above -4°F / -34°C 15W-40
Engine oil should have properties of API classification
CC/SE or CC/SF grades.
Units ship with 10-40 CC/SG.
Perkins 704-30 Engine
Oil capacity (including filter) 9.6 quarts 9 liters
Oil viscosity requirements
below 60°F / 15.5°C 15W-40
-10°F to 90°F / -23°C to 32°C 10W-30
above -4°F / -34°C 15W-40
Engine oil should have properties of API classification
CF4 grade.
Units ship with 10-40 CC/SG.
Check the Hydraulic Oil Level
Maintaining the hydraulic oil at the proper level is
essential to machine operation. Improper hydraulic
oil levels can damage hydraulic components. Daily
checks allow the inspector to identify changes in oil
level that might indicate the presence of hydraulic
system problems.
1 Be sure that the boom is in the stowed position,
then visually inspect the sight gauge located on
the side of the hydraulic oil tank. Add oil as
needed.
Result: The hydraulic oil level should be within
the top 2 inches (5 cm) of the sight gauge.
Hydraulic oil specifications
Hydraulic oil type Dexron equivalent
Tank capacity 45 gallons
170 liters
Hydraulic system 55 gallons
(including tank) 208 liters