Filter
Top Products
Part No. 97550 Genie Superlift Advantage 13
Operator's ManualThird Edition • Second Printing
FUNCTION TESTS
Test Two-Speed Winch Operation
1 Install a load handling attachment.
2 Shift the winch to the slow speed.
3 Raise the carriage by firmly grasping the winch
handles and rotating them towards the mast.
Result: The winch should operate smoothly, free
of hesitation or binding.
4 Lower the carriage by
firmly grasping the
winch handles and
rotating them away
from the mast. After
lowering to the
desired position, turn
the winch handles
toward the mast
(raise the load)
1
/4
turn to set the brakes.
Result: The winch should operate smoothly, free
of hesitation or binding.
5 Shift the winch to the fast speed and repeat
steps 3 and 4.
Test Mast Sequencing
1 Install a load handling attachment.
2 Raise the carriage to full height by firmly
grasping the winch handles and rotating them
towards the mast.
Result: The carriage should raise to the top of
the front mast section, followed in consecutive
order by each mast section.
3 Fully lower the carriage. After lowering to the
desired position, turn the winch handles toward
the mast (raise the load)
1
/4 turn to set the
brakes.
Test One-Speed Winch Operation
1 Install a load handling attachment.
2 Raise the carriage by firmly grasping the winch
handles and rotating them towards the mast.
Result: The winch should operate smoothly, free
of hesitation or binding.
3 Lower the carriage by
firmly grasping the
winch handles and
rotating them away
from the mast. After
lowering to the
desired position, turn
the winch handles
toward the mast
(raise the load)
1
/4
turn to set the brakes.
Result: The winch should operate smoothly, free
of hesitation or binding.
down
up
down
up