Generac Power Systems 941 Portable Generator User Manual


 
Section 6.6
OPTIONAL REMOTE PANEL
GENERAL
An optional remote-mounted Start-Stop panel is avail-
able. This panel will permit the generator to be started
and stopped from some convenient remote location in
the recreational vehicle.
REMOTE PANEL CABLES
The generator is equipped with a 4-pin receptacle for
connection of the remote panel. Cables are available
which mate with the receptacle and interconnect the
generator with the remote panel.
Cable Model 9045 is a 10 foot long, 4-wire cable.
Cable Model 9046 is a 30 foot long, 4-wire cable.
Figure 1. Remote Panel Receptacle
DESCRIPTION
MODEL 9042:
The Model 9042 remote panel mounts a rocker type
Start-Run-Stop switch and a "GEN. RUN" advisory
lamp. The lamp is turned on by Wire 14 current when
the generator is running.
Figure 2. Model 9042 Remote Panel
MODEL 9043:
The Model 9043 remote panel mounts a rocker type
Start-Run-Stop switch, a "GEN. RUN" lamp and an
hourmeter.
The "GEN. RUN" lamp will turn on when the engine is
running. It is turned on by Wire 14 power.
The Hourmeter provides a continuous indication of
generator operating hours in hours and tenths of
hours. It can be used in conjunction with the required
periodic maintenance on the unit.
Figure 3. Model 9043 Remote Panel
Page 6.6-1