Filter
Top Products
Home Standby – 18kW
GENERAC
®
POWER SYSTEMS, INC. • P.O. BOX 8 • WAUKESHA, WI 53187
262/544-4811 • FAX 262/544-4851
© 2007 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice.
Bulletin 0174200SBY / Printed in USA 04.07
STANDARD ENGINE & SAFETY FEATURES
High Temperature Automatic Shutdown Vibration Isolation of Unit to Mounting Base
Low Oil Pressure Automatic Shutdown 12 Volt, Solenoid-Activated Starter Motor
Overspeed Automatic Shutdown (Solid-state) Air Cleaner
Crank Limiter (Solid-state) Fan Guard
Oil Drain Extension Control Console
Rubber-Booted Engine Electrical Connections Muffler Guard
Fuel Lockoff Solenoid Flexible Fuel Lines
Secondary Fuel Regulator (N.G. and L.P.) Critical Exhaust Silencer
Battery Charge Alternator Battery Trickle Charger
Battery Cables Main Line Circuit Breaker
Battery Tray Weather Protective Enclosure (Locking Type)
HOME STANDBY CONTROL FEATURES
Home Standby Control Console
Manual/Auto/Off switch
Fault indicator lamps
Fuse (panel overload)
Set exercise time switch
Home Standby Microprocessor
Controls
Automatic voltage regulation
Utility voltage sensing
Utility interrupt delay
(10-second setpoint)
Engine warm-up
(10-second setpoint)
Engine cool-down
(1-minute setpoint)
Seven-day exerciser
Design and specifications subject to change without notice. Dimensions shown are approximate. Contact your Generac dealer for certified drawings. DO NOT USE THESE DIMENSIONS FOR INSTALLATION PURPOSES.
18 kW UNIT WEIGHT: 451 lbs.