Filter
Top Products
1 026915 2 NIPPLE CLOSE 3/4 X 1.375
2 075580 1 FLANGE FUEL INLET
3 0F6390 1 REGULATOR ASSEMBLY DUAL FUEL
4 039253 2 SCREW HHC M8-1.25 X 20 G8.8
5 022145 2 WASHER FLAT 5/16-M8 ZINC
6 022129 4 WASHER LOCK M8-5/16
7 045771 2 NUT HEX M8-1.25 G8 CLEAR ZINC
8 042907 2 SCREW HHC M8-1.25 X 16 G8.8
9 0E9295A 1 ASSY THROTTLE 27MM
10 026812 2 ELBOW 90D 3/4NPT
11 025424 1 NIPPLE PIPE 3/4NPT X 6
12 0F3869 1(REF) SWITCH, PRESSURE GAS 5" RISE (INCLUDED WITH I/N 3)
13 057823 6 CLAMP HOSE #10 .56 - 1.06
14 059194 1 HOSE 5/8 ID LPG & NG (31.5” LG)
15 044117 1 BARBED STR 3/8 NPT X 5/8
16 0D1509 1 DECAL INLET PRESSURE
17* 050279 1 DECAL FUEL INLET NG (NATURAL GAS APPLICATION)
050280 1 DECAL FUEL INLET LPG (LP VAPOR APPLICATION)
18 0E6123 1 INTAKE ADAPTER 3.0L FORD-BOSCH
19 0E6586 1 GASKET BOSCH 32
20 0E4395 1 ACTUATOR BOSCH 32 GOVERNOR
21 057753B 1 HOSE 1.5 ID X 2 LG 20R4
22 0E6382A 1(REF) VENTURI HOLDER W/32MM ACTUATOR
23 0E7121 1(REF) O-RING 47.625 ID X 2.38 WIDTH
24 0E6376A 1(REF) VENTURI, 27 ID THROTTLE W/CHOKE
25 047487 4 SCREW SHC M6-1.0 X 18 G12.9
26 022097 8 WASHER LOCK M6-1/4
27 051751 4 SCREW HHC M6-1.0 X 50 G8.8
28 035685 2 CLAMP HOSE #28 1.32-2.25
29 0A2038 2 WASHER FLAT 3/8 ZINC
30 047290 1 HOSE 3/8 ID SINGLE BRAID (305mm [12”] LONG)
31 047290 1 HOSE 3/8 ID SINGLE BRAID (432mm [17”] LONG)
32 0A4121 1 VALVE PCV
33 0E6609 1 GROMMET ROCKER COVER 3.0LFORD
34 049099 1 BARBED EL 90 3/8 X 3/8 PLST
35 ** 055934M 1 CLAMP VINYL .75 X .343 Z
36 ** 047411 1 SCREW HHC M6-1.0 X 16 G8.8
37 ** 022097 1 WASHER LOCK M6-1/4
38 ** O22473 1 WASHER FLAT 1/4-M6 ZINC
39 0F6155 1 HARNESS, CPL FUEL JUMPER
NOTES:
1.
REGULATOR (I/N 3) AS SHOWN IN ILLUSTRATION IS SET UP FOR
NATURAL GAS APPLICATION.
2.
TO CONFIGURE REGULATOR FOR LP VAPOR, SWITCH HOSE BARB,
HOSE CLAMP (I/N 13) AND HOSE (I/N 14) FROM “OUT-1” TO “OUT-2”.
REPLACE PIPE PLUG FROM “OUT-2” TO “OUT-1”. USE PIPE SEALANT
ON HOSE BARB AND PIPE PLUG. MAKE SURE TO KEEP PORTS FREE
FROM DEBRIS DURING RECONFIGURATION PROCESS.
3*. FOR LP VAPOR APPLICATION SUBSTITUE LPG FUEL INLET DECAL P/N
050280 FOR NG FUEL INLET DECAL P/N 050279 (ITEM17).
4 . WHEN SWITCHING FUEL TYPES, THE PROPER DIP SWITCH SITTINGS
MUST BE MADE TO THE CONTROL PANEL. SEE OWNERS MANUAL, FUEL
SECTION FOR MORE DETAILS.
** NOT SHOWN-USED TO HOLD #31 IN PLACE