Filter
Top Products
6
CONNECTING AND OPERATING THE
GEFENTOOLBOX 1:8 SPLITTER FOR HDMI WITH FST
GTB-HDFST-148
HDMI Source
HDMI Display
HDMI Display
HDMI Display
HDMI Display
HDMI Display
HDMI Display
HDMI Display
HDMI Display
HDMI Splitter
HDMI CABLE
Gefen
H
M
I Sp
l
itte
r
Wiring Diagram for the GefenToolBox 1:8 Splitter for HDMI with FST
How to Connect the GefenToolBox 1:8 Splitter for HDMI with FST
1. Use the supplied HDMI cable to connect a Hi-Def source device to the HDMI
input port of the GefenToolBox 1:8 Splitter for HDMI with FST.
2. Use additional user supplied HDMI cables to connect up to 8 HDTV displays
to the output ports on the 1:8 Switcher for HDMI with FST.
3. Connect the included 5V DC power supply to the power receptacle on the
Splitter.
4. Connect the other end of the power supply to an available power outlet.
How to Operate the GefenToolBox 1:8 Splitter for HDMI with FST
The GefenToolBox 1:8 Splitter for HDMI with FST does not require any
confi guration to begin splitting the incoming HDMI input signal. However,
depending on the features required by the user, the EDID Mode and Audio
Channel Selection switches may need to be adjusted. See the following section
for more information on the usage of these switches.