Filter
Top Products
page | 3
Getting Started
Panel Layout
ID Name Description
1 Out 1 - Out 4 Connect an Ultra HD display to each of
these ports using HDMI cables.
2 FST (Fast / Slow) Use this slider switcher to switch between
Fast and Slow FST (Fast Switching
Technology) modes. See Setting the
Switching Mode for more information on
using FST mode.
3 Audio (2ch / Multi-ch) Use this slider switcher to switch between
2CH and Multichannel audio on the output.
See Setting the Audio Channel Mode for
more information on using this feature.
4 EDID (Int / Ext) Use this slider switch to switch between
internal (Int) and external (Ext) EDID
modes. See Setting the EDID Mode for
more information.
5 In Connect the included HDMI cable from the
Ultra Hi-Def source to this HDMI port.
6 USB Used for upgrading the rmware.
See Firmware Upgrade Procedure for more
information.
7 5V DC Connect the included 5V DC power supply to
this locking power receptacle.
8 Power This LED indicator will glow bright blue
when the included 5V DC power supply
is connected between the splitter and an
available electrical outlet.