Filter
Top Products
EU Certificate of Conformity
ENGLISH - 10
The undersigned GARDENA Manufacturing GmbH, Hans-Lorenser-Str. 40, D-89079 Ulm, hereby certifies
that, when leaving our factory, the units indicated below are in accordance with the harmonised EU
guidelines, EU standards of safety and product specific standards. This certificate becomes void if the units
are modified without our approval.
Description of Unit......................Electric Chainsaw
Type(s) ......................................CST3519-X, CSI4020-X
Year of CE Marking....................2009
EU Directives:
98/37/EC, 2004/108/EC, 2000/14/EC
Harmonised EN:
EN60745-1, EN60745-2-13, EN50366, EN55014-1, EN61000-3-2, EN61000-3-11
Notified Body that carried out the EC type-examination
in accordance with article 8 section 2c.......MEEI Kft., 1007
Váci út 48/a-b
1132 Budapest
Hungary
Certificate no. .............................................M3 2992559 (CST 3519-X)
M3 2992560 (CST 4020-X)
Working area related emission characteristic Level L
pA
according to ISO 22868 given in the table.
Vibrations Value a
h
according to ISO 22868 given in the table.
The Noise Level L
WA
values according to 2000/14/EC are given in the table.
Conformity Assessment Procedure............ Annex V
Ulm 16/07/2009
Peter Lameli
Technical Dept. Manager
EN 61000-3-11 Compliance statement
Depending on the characteristics of the local electricity supply network, use of this product may result in
short voltage drops at the instant of switching on. This may influence other electrical equipment e.g a
momentary dimming of a lamp. If the Mains impedance Zmax of your electricity supply is less than the
value shown in the table (applicable to your model) then these effects will not occur. The value of the
network impedance may be determined by contacting your electricity supply authority
Type CST3519-XCSI4020-X
Dry Weight (Kg) 5.6 5.5
Power (kW) 1.9 2.0
Oil tank volume (cm
3
) 180 180
Chain pitch (inches) 3/8 3/8
Chain gauge (mm) 1.3 1.3
Maximum length of guide bar (mm) 350 400
Measured Sound Power L
WA
(dB(A)) 106 106
Guaranteed Sound Power L
WA
(dB(A)) 108 108
Sound pressure Level L
pa
(dB(A)) 95 95
Value a
h
(m/s
2
) 5.9 5.3
Uncertainty K of a
h
(m/s
2
) 1.5 1.5
Mains-Impedance Z
max (
Ω)
0.310 0.314
Cutting Speed (m/s)
12 15