Frontier Labs MS1266 Spreader User Manual


 
Longer component life (inset photo)
New T-rod chain with 16,000 lbs. of tensile
strength, lasting up to twice as long as a T-bar
chain. (Standard on MS1223, MS1227, MS1231,
MS1237, and MS1243.)
Cast-special, steel-alloy apron idler slides offer
Design protects hydraulic lines
With the optional second hydraulic endgate cylinder, hydraulic lines run through
a 3x3 tube under the floor, eliminating the chance for punctures, tears, and leaks.
(Available on MS1223, MS1227, MS1231)
Hydraulic apron drive
Provides versatile load movement with variable speeds. Standard on the MS1256 and
MS1266, and optional on all other Frontier Heavy-duty Spreaders.
Two-speed apron drive
Includes low speed, high speed, and cleanout mode.
(Standard on MS1223, MS1227, MS1231, MS1237, and MS1243.)
Introducing the all-new line
of Frontier Heavy-duty
Manure Spreaders, available
exclusively through your
John Deere dealer!
With
seven models from 235- to
660-bushel capacity, there’s a
rugged Frontier spreader that’s
just right for your operation.
These spreaders boast one of
the largest beaters on the
market – 29 inches in
diameter – for wide, uniform
spread patterns. Various
paddle assemblies deliver
greater spreading control;
blunt for widespread, and
sharp, ripper-type paddles
for more aggressive shredding
action. An optional top beater
makes easy work of high-
heaped loads.
Built-in strength for long
life, guaranteed!
Frontier
spreaders are constructed of
a massive welded frame,
reinforced with heavy floor
supports and side stakes for
tremendous strength and
durability. The entire spreader
box is poly-bonded for easy
cleaning and minimal freeze
up, and comes with a limited
lifetime warranty!* Check out
these tough-built spreaders at
your local John Deere
dealership today or visit us
at
www.BuyFrontier.com.
*Warranty subject to limitations. See operators manual
for warranty details.
All-new Frontier Manure Spreaders: Built tough for the long haul
Rugged, heavy-duty construction
Massive all-welded frame features heavy-duty floor and side stakes, and wrap-
around steel front corners. Rear main-beater side panels are welded to durable
5-inch U-channel side members for extra strength, reliability.
Easy cleaning, smooth unloading
Entire spreader box is poly-bonded to marine-type plywood for easy cleaning and
minimal freeze up, reducing the amount of torque needed to move heavier loads.
Versatile spreading action
Paddle assemblies match your material; blunt for wide spread patterns, and sharp,
ripper-type paddles for more aggressive shredding action.
Tackle high-heaped loads
Top beater makes easy work of high-heaped loads.
(Standard on MS1256 and MS1266, optional on all other heavy-duty models)
Years of dependable service
Spreader boxes are constructed of corrosion-resistant galvanized steel to ensure long
life. Poly-bonded floor and sides come with a limited lifetime warranty!*
*Warranty subject to limitations. See operators manual for warranty details.
BUSHEL CAPACITY AND UNLOAD SPEED
HEAVY-DUTY MANURE SPREADER FEATURES
Capacity Struck Level (cu. ft.) Heaped (bushel, old rating)
MS1223 143 235
MS1227 167 270
MS1231 185 310
MS1237 235 370
MS1243 275 430
MS1256 353 560
MS1266 479 660
Unloading Speed (per minute) High Speed Low Speed
MS1223 2-speed gearbox 8 ft. 9 in. 4 ft. 9 in.
MS1227 2-speed gearbox 8 ft. 9 in. 4 ft. 9 in.
MS1231 2-speed chain drive 8 ft. 8.5 in. 4 ft. 8.5 in.
MS1237 2-speed chain drive 8 ft. 8.5 in. 4 ft. 8.5 in.
MS1243 2-speed chain drive 8 ft. 8.5 in. 4 ft. 8.5 in.
MS1256 Variable-speed
hydraulic drive 0 ft. - 17 ft. 6 in. @16 GPM (no load)
MS1266 Variable-speed
hydraulic drive 0 ft. - 17 ft. 6 in. @16 GPM (no load)
Easy apron adjustment
Adjust the main apron by simply loosening the two side bolts and pulling up
the long bolt. Simple and fast.
Hydraulic endgate
Helps contain high-moisture loads and prevents spillage during transport.
(Optional on MS1223 and MS1227, standard on all other heavy-duty models)
Better cutting coverage
With one of the largest beaters on the market – 29 inches in diameter – these
spreaders cover more area from top to bottom to handle big loads with ease. Faster
tip-speed provides a wide, uniform spread.
Efficient load movement
Strong, double main-apron chain handles heavy loads with ease.
(Standard on MS1256 and MS1266)
Longer component life
Apron idler sprockets are made from rugged cast, steel alloy. They last far longer
than idler sprockets found on other spreaders.