Flymo VM032 Lawn Mower User Manual


 
Cutting Height Adjustment
Grassbox
Cutting Height Adjustment (K) & (L)
Height of cut is adjusted by raising or lowering the
Front and Rear Wheels.
There are five heights of cut on this product.
NOTE
Amedium height of cut is recommended for most
lawns.
The quality of your lawn will suffer and collection will
be poor if you cut too low.
HEIGHT OF CUT
WHEELS POSITION
Low Front position 2cm
Rear position 2cm
Low to Medium Front position 2cm
Rear position 4cm
Medium Front position 4cm
Rear position 4cm
Medium to High Front position 4cm
Rear position 6cm
High Front position 6cm
Rear position 6cm
L
K
2cm
J
Fitting Fully Assembled Grassbox to
Lawnmower.
1. Lift safety flap (G1)
2. Make sure the discharge chute is clean and free
from debris (G2)
3. Locate fully assembled grassbox onto 2 location
points (G3) at the rear of the deck as illustrated
in pic. H
4. Locate safety flap onto the top of the grassbox.
Ensure the grassbox is securely located.
IMPORTANT !
AFTER FITTING ENSURE NO GAP REMAINS
BETWEEN THE SAFETY FLAP AND THE
GRASSBOX.
Removal is the reverse procedure.
For larger areas of grass where grass collection
is not required you can use your lawnmower
without the grassbox. Ensure the Safety Flap is
fully closed. The design of the safety flap per-
mits the cut grass to be discharged downward
behind the machine.
Grassbox Full Window (Visimo Only)
As the grassbox fills up, grass will be visible
through the window (J).
When the window/grassbox is full it is time to
empty the grassbox.
grassbox
empty
grassbox
full
G
1
2
3
H
Visimo Only
6cm
4cm