Filter
Top Products
Cutting Height Adjustment
Cutting Height Adjustment (E) & (F)
• Height of cut is adjusted by raising or lower-
ing the wheels.
• There are five heights of cut on this product.
HEIGHT OF CUT
WHEELS POSITION
Low Front position 1
Back position 1
Low to Medium Front position 1
Back position 2
Medium Front position 2
Back position 2
Medium to High Front position 2
Back position 3
High Front position 3
Back position 3
• NOTE
A medium height of cut is recommended for
most lawns.
The quality of your lawn will suffer and col-
lection will be poor if you cut too low.
F
E
Grassbox
Fitting Fully Assembled Grassbox to
Lawnmower. See Fig G.
1. Lift safety flap.
2. Make sure the discharge chute is clean and free
from debris.
3. Locate fully assembled grassbox onto the loca-
tion point at the rear of the deck (G1)
4. Locate safety flap onto the top of the grassbox.
Ensure the grassbox is securely located.
• IMPORTANT !
AFTER FITTING ENSURE NO GAP REMAINS
BETWEEN THE SAFETY FLAP AND THE
GRASSBOX.
• Removal is the reverse procedure.
• For larger areas of grass where grass collection
is not required you can use your lawnmower
without the grassbox. Ensure the Safety Flap is
fully closed. The design of the safety flap per-
mits the cut grass to be discharged downward
behind the machine.
G
3
2
1
1