Filter
Top Products
7
USE
Spool Cap
cap
release
latches
cap
spool
spoolholder
eyelet
manual line
feed button
G
H
• WARNING
Disconnect from the mains
electricity supply, before
attempting any maintenance or
adjustment. Cutting head
continues to rotate after the
trimmer has been switched off.
To remove spool cap
1. Press and hold in the two cap
release latches. See fig G.
2. Pull cap away from the cutting head.
See fig H.
When refitting the spool cap
1. Keep all areas of the cap and
spoolholder clean. Failure to do so
may prevent the cap being securely
located in the spoolholder.
2. Align the two latches on the cap with
the two windows in the spoolholder,
then press down into the locked
position.
3. Ensure the two cap release latches
are clearly visible and are fully
engaged with the windows in the
spoolholder.
4. Check that the cap is correctly fitted
by trying to remove it without
depressing the two latches.