Filter
Top Products
Fails to Operate
1. Is the correct Starting procedure being followed?
See ʻTo Start your Lawnmowerʼ
2. Is the Power Turned On?
3. Check the fuse in the plug, if blown replace.
4. Fuse continues to blow?
Immediately disconnect from the mains electricity
supply and consult your local approved Service
Centre.
Poor Flotation
1. Disconnect from the mains electricity supply.
2. Clean the underside of the hood and the fan blades.
3. Raise to a higher height of cut. See ʻAdjusting the
Cutting Heightʼ.
4. If poor flotation persists?
Disconnect from the mains electricity supply and
consult your local approved Service Centre.
Poor Collection
1. Is the grassbox lid firmly closed?
2. Is the grassbox fitted correctly?
3. Are you mowing correctly?
4. Check all air vents and openings are not obstructed.
5. Raise to a higher height of cut. See ʻAdjusting the
Cutting Heightʼ.
6. If poor collection persists.
Disconnect from the mains electricity supply and
consult your local approved Service Centre.
Excessive Vibration
1. Disconnect from the mains electricity supply.
2. Check that the blade is fitted correctly?
3. If the blade is damaged or worn, replace it with a new one.
4. If vibration persists?
Immediately disconnect from the mains electricity sup-
ply and consult your local approved Service Centre.
If any part is found to be defective due to faulty manu-
facture within the guarantee period, Husqvarna UK
Ltd., through its Authorised Service Repairers will effect
the repair or replacement to the customer free of
charge providing:
(a) The fault is reported directly to the Authorised Re-
pairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or faulty
adjustment by the user.
(d) The failure has not occurred through fair wear and
tear.
(e) The machine has not been serviced or repaired,
taken apart or tampered with by any person not au-
thorised by Husqvarna UK Ltd..
(f) The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used commercially.
* This guarantee is additional to, and in no way di-
minishes the customers statutory rights.
Failures due to the following are not covered, therefore
it is important that you read the instructions contained
in this Operator's Manual and understand how to oper-
ate and maintain your machine:
Failures not covered by guarantee
* Replacing worn or damaged blades
* Failures as a result of not reporting an initial fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product in accor-
dance with the instructions and recommendations con-
tained in this Operator's Manual.
* Machines used for hire are not covered by this guarantee.
* The following items listed are considered as wearing
parts and their life is dependent on regular maintenance
and are, therefore not normally subject to a valid war-
ranty claim: Blade, Electric Mains cable, belt
* Caution!
Husqvarna UK Ltd. does not accept liability under the war-
ranty for defects caused in whole or part, directly or indirectly
by the fitting of replacement parts or additional parts that are
not either manufactured or approved by Husqvarna UK Ltd.,
or by the machine having been modified in any way.
Guarantee & Guarantee Policy
Fault Finding Hints
Environmental Information
Husqvarna UK Ltd. are manufactured under an Environmen-
tal Management System (ISO 14001) using, where practical,
components manufactured in the most environmentally re-
sponsible manner, according to company procedures, and
with the potential for recycling at the end of the productsʼ life.
• Packaging is recyclable and plastic components have
been labelled (where practical) for categorised recycling.
• Awareness of the environment must be considered when
disposing of ʻend-of-lifeʼ product.
• If necessary, contact your local authority for disposal infor-
mation.
The symbol on the product or on its packaging indicates
that this product may not be treated as household waste. In-
stead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the envi-
ronment and human health, which could otherwise be
caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product,
please contact your local council office, your household
waste disposal service or the shop where you purchased the
product.
Service Recommendations
1. We strongly recommend that your product is serviced at least
every twelve months, more often in a professional application.
2. Always use genuine Flymo Spare Parts.
3. Prepacked spares are available from most Husqvarna
UK Ltd. stockists.
4. Your product is uniquely identified by a silver and black
product rating label
5. If you have a problem with your machine contact your local
Approved Service Centre ensuring you have full details of
your product as described on the product rating label.
6. Should it be necessary for work to be carried out by
your Service Centre, it is important to take your com-
plete machine including cable and any extension ca-
bles used.
A network of specialist dealers can be found in your local
Yellow Pages.
To obtain service on your Flymo product simply telephone
or visit your local Service Centre.
Should you require service under the terms of our guarantee
the Service Centre will require proof of purchase.
All of the centres listed stock genuine Flymo Spare
Parts.
NOTE: Our Service Repairers act on their own behalf
and are not empowered to commit or legally bind Husq-
varna UK Ltd. in any manner whatsoever.