Filter
Top Products
Starting and Stopping
E
F
D
H
J
1
To Start your Lawnmower
The Flymo Vision Compact uses an advanced belt drive
system, between the motor and the blade which
improves cutting power and flotation in all conditions.
Due to the high turning force (Torque) which this motor
develops a light squeak may be heard when the
machine is started, this is quite normal and will not
effect the performance of the product
1. Connect female extension cable connector to the
back of the switchbox. (D)
2. Form loop in mains cable and push the loop
through the slot as illustrated in picture (E)
3. To secure, position loop over the hook and pull
the cable back through the slot as illustrated in
picture (F).
4. Connect plug to mains and switch on.
5. To prevent a ring being cut in your lawn and to
clear any residual grass in the collection chute, tilt
your lawnmower slightly (G).
The switchbox is provided with a lock-off button
(H1) to prevent accidental starting.
6. Press and hold the lock-off button (H) on the
switchbox, then squeeze one of the Start/Stop
levers towards the upper handle (J).
7. Continue to squeeze the start/stop lever towards
the upper handle and release the lock-off button.
8. When the lawnmower has reached full speed
gently lower it onto the lawn.
NOTE:There are two start/stop levers fitted.
Either one can be used for starting the lawn-
mower.
IMPORTANT:Do not use the start/stop levers
intermittently
To Stop your Lawnmower
1. To prevent a ring being cut in your lawn and to
clear any residual grass in the collection chute, tilt
your lawnmower slightly (H).
2. Release the pressure on the Start/Stop lever.
G