Filter
Top Products
2
Assembly
8
• Insert two #6 x 1.9 cm screws through each upper swing arm
and into each lower swing arm. Tighten the screws.
• Fit the lower swing arm assembly to the outside of each
upper swing arm.
7
Lower Swing Arm Assembly
(with Restraint System)
Upper Swing Arms
Seat Back Tube
Buttons
9
• Position the seat back tube so that it curves toward the back
of the swing.
• While pressing the buttons on the seat back tube, fit the seat
back tube into the short tubes on the swing arms.
• Push the seat back tube until it
“clicks”
into place.
• Pull up on the seat back tube to be sure it is secure to the
swing arms.
Swing Arm Short Tubes
5