Filter
Top Products
12
12
Setup and Use
1
Waist Belts
Crotch Belt
Securing your Infant
• Place your child in the seat. Position the crotch belt between
your child’s legs.
• Fasten the waist belts to the crotch belt. Make sure you hear
a “click” on both sides.
• Check to be sure the restraint system is securely attached by
pulling it away from your child. The restraint system should
remain attached.
2
To tighten the waist straps:
• Feed the anchored end of the waist belt up through the buckle
to form a loop Ạ. Pull the free end of the waist belt ạ.
To loosen the waist straps:
• Feed the free end of the waist belt up through the buckle to
form a loop Ạ. Enlarge the loop by pulling on the end of the
loop toward the buckle. Pull the anchored end of the waist belt
to shorten the free end of the waist belt ạ.
Free End
Free End
Anchored End
Anchored End
TIGHTEN
LOOSEN
IMPORTANT! Before each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any
parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts.
WARNING
To prevent serious injury or death
from falls and being strangled in
the restraint system:
• Always use the restraint system.
Never rely on the tray to restrain child.
• Never use with an active child who
may be able to climb out of the seat.
• Not recommended for children who
can sit up by themselves (6 months
approximately, until 9 kg (20 lbs).
• Never leave the child unattended.
• It is dangerous to use this product
on an elevated surface.