Position the wheels so that the raised detail is toward the golf bag. Slide
and “snap” the wheels onto the large pegs on the bottom of the golf bag.
This may require alot of force. Pull on the wheels to be sure they are com-
pletely attached.
Position the handle so that the tabs are toward the golf bag. Align, insert and
snap all of the tabs on the handle into the slots in the back of the golf bag.
Pull on the handle to be sure it is completely attached.
Fit the large tab on the base into the slot in the bottom of the golf bag. Using
your fingers, press near the tab to be sure the base inserts completely into
the golf bag. Pull on the base to be sure it is completely attached.
One-time assembly is now complete.
One-Time Assembly
Golf Bag
Wheel
Base
Handle
Tee
Driver
Putter
5 Balls
Handle
1
2
3
PRESS HERE
Base
Wheel
Large Peg
Large Peg
1
2 3
Golf
Bag
Tabs
2