Filter
Top Products
6
or identify targets.
3. PINPOINT/DEPTH READING: A three purpose, spring
loaded push-button. When pushed and held, the
CZ-3D goes into a no-motion, all-metal mode for
precise pinpointing and approximate depth reading
of coin-sized targets. This button is also used in
conjunction with the GROUND control during the
ground balancing procedure.
4. SENSITIVITY/BATT TEST: In the extreme counter-
clockwise position, the battery condition is checked
as indicated by a strong or weak tone and a meter
reading. When rotated clockwise, sensitivity to targets
(as well as ground mineralization and electrical
interference) is increased. When in the AUTOTUNE
mode, this control also acts as a “threshold tone”
control.
5. HEADPHONES: This connector accepts most stereo
headphones.
6. MODE: ENHANCE position for dry land or shallow fresh
water hunting. SALT position for wet-sand ocean
beaches or hunting in shallow surf.
7. VOLUME/OFF: Power on-off and volume control.
Volume is gradually increased from 1 to 5 settings. From
5 to 10, loud target response is held constant while faint
targets continue to get louder (audio boost).
CONTROL PANEL
Figure 3, CONTROL PANEL
1
2
3 4 5
6
7