Filter
Top Products
25
MAINTENANCE SCHEDULE
The following schedule should be followed for normal care of your rider and mower. You will need to keep a
record of your operating time. Determining operating time is easily accomplished by observing the elapsed time
recorded by the hour meter.
Regular Maintenance
MOWER MAINTENANCE
Before Each Use
Check Safety Interlock System
Check Rider Brakes
Check for loose hardware
Check Hydraulic Oil Level
Every 25 Hours
Clean Deck & Check / Replace Mower Blades*
Lubricate Rider & Mower*
Check Tire Pressure
Every 100 Hours
Clean Battery & Cables
Every 250 Hours
Change Hydraulic Oil & Filter
ENGINE MAINTENANCE
Before Each Use
Check Engine Oil Level
Every 25 Hours
Check / Clean Cooling Fins & Intake*
Every 50 Hours
Check / Clean Spark Arrester**
Refer to Engine Owner’s Manual
Service Air Filter
Check / Replace Spark Plugs
Check / Replace Fuel Filter
Check / Clean Spark Arrester
* More often in hot (over 85° F: 30° C) weather or
dusty operating conditions.
* More often in hot (over 85° F: 30° C) weather or
dusty operating conditions.
** If equipped. Replace if damaged.
Figure 14. Checking Tire Pressure
CHECK TIRE PRESSURES
Tire pressure should be checked periodically, and
maintained at the levels shown in the chart. Note
that these pressures may differ slightly from the “Max
Inflation” stamped on the side-wall of the tires. The
pressures shown provide proper traction, improve cut
quality, and extend tire life.
Tire Pressure
psi bar
Front 25 1,72
Rear 15 1,03
Not for
Reproduction