Filter
Top Products
35
Maintenance
Regular Maintenance
LUBRICATION
Lubricate the unit at the locations shown in Figure 20
through 25.
Grease:
Use grease fittings when present. Disassemble
parts to apply grease to moving parts when
grease fittings are not installed.
Not all greases are compatible. Ferris Red Grease
(P/N 5022285) is recommended, automotive-type
high-temperature, lithium grease may be used when
this is not available.
Oil:
Generally, all moving metal parts should be oiled
where contact is made with other parts. Keep oil
and grease off belts and pulleys. Remember to
wipe fittings and surfaces clean both before and
after lubrication.
Figure 20. Deck Lift Pivots
Figure 21. Mule Drive Idler Arm
*
*
Figure 22. Deck Lubrication
* - Use needle nozzle
Figure 25. Casters, Wheels & Suspension Arms
Figure 23. Control Handle Pivots & Seat Pivots
Figure 24. Center Lift Link