Fellowes DM-4 Chipper User Manual


 
A
B
C
D
E
F
Declaration of Conformity
Fellowes Manufacturing Company
Doncaster Road, Kirk Sandall
Doncaster, South Yorkshire, DN31H England
declares that the product
Models PS60, PS60CC, PS70, PS75 and PS80,
conforms with the requirements of the Low Voltage Directive (73/23 EEC) and the Electromagnetic Compatibility
Directive (89/336 EEC) and the following harmonized European Normes (EN Standards) and IEC Standards.
Safety: EN60950 ‘Information Technology Equipment’
EMC: Standard Severity Level Performance Criteria
EN 55104:1995 NA NA
EN 61000-4-2:1995 4kV Contact, 8kV Air B
ENV 50141:1993 3V, 150 kHZ to 230 Mhz 80% A
EN 61000-4-6: 1996 1kHz Modulation
EN 61000-4-4:1995 1kV, 5/50ns, 5kHz, AC Mains B
ENV 50142:1994 1kV Differential Mode (Line-Line) B
EN 61000-4-5:1995 2kV Common Mode (Line-Gnd)
EN 61000-3-2:1995 Table 1 Limits NA
EN 61000-4-11: 1995 10ms Dropout, 200ms 60% C
Variation, 1 sec 30% Variation
EN 55014:1993 Household limits NA
Itasca, Illinois, USA _____________________
May 30, 1999 Anthony Storrie
7
A
B
C
D
E
F
Limited Warranty
Fellowes Manufacturing Company warrants the cutting cylinders of all Fellowes shredders to be free
from defects in material and workmanship for five years from the date of purchase by the original
consumer. Fellowes warrants all other parts of the machine to be free of defects in material and
workmanship for one year from the date of purchase by the original consumer. If any part is found to be
defective during the warrant period, your sole and exclusive remedy will be repair or replacement, at
Fellowes’ option and expense, of the defective part.
This warranty does not apply in cases of abuse, mishandling or unauthorized repair. ANY IMPLIED
WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY
LIMITED IN DURATION TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. In no event shall
Fellowes be liable for any consequential or incidental damages attributable to this product. This warranty
gives you specific legal rights. You may have other legal rights that vary from state to state.
For more detail or to obtain service under this warranty, please contact Fellowes Customer Service
at 1-800-955-0959, Monday through Friday, 8 AM - 5 PM (Central Standard Time).
For specific instructions on obtaining service under this warranty on machines purchased outside the USA,
contact the appropriate location listed in the Contact for Service section of this instruction manual.
Warrantor: Fellowes Manufacturing Company.
6
Specifications:
Shredding Speed = 20fpm (6m/min)
Power Source: 120V-60Hz (N. America)
240V-50Hz (Australia)
230V-50Hz (U.K., Europe)
100V-50/60HZ (Japan)
Power Cord: 6 Feet (1.9 meters)
Recommended daily use 50-75 sheets
Shred Size:
PS60CC, PS80, DM-C
5/32” x 4/5” (3.9mm x 20mm)
All others
7/32” (5.8mm) strip
Model Entry Width Dimensions Weight
PS60
PS60CC
9" 17” x 14 3/8” x 10” 20 lbs.
DM-C
(230mm) (432 x 365 x 254 mm) (9.1 kg)
DM-4
DM-6
PS70
9 1/2" 20 3/4” x 16 1/2” x 10” 28 lbs.
PS75
(241mm) (527 x 419 x 279 mm) (12.7 kg)
PS80