2
KEY FEATURES AND CONTROLS
CAPABILITIES
CONTROL PANEL
ENGLISH
Model 300C/500C
Will not shred: Adhesive labels, continuous form paper, bound documents, transparencies,
newspaper, cardboard, binder clips, industrial staples, more than 20 pages stapled together,
laminates, 3½ in. Floppies, file folders, X-rays or plastic other than noted above
Paper shred size:
Cross-Cut ...................................................................5/32 in. x 1-1/2 in. (4mm x 38mm)
Maximum:
500C Paper Capacity (8.5 in. x11 in. paper) ..............................................................500*
300C Paper Capacity (8.5 in. x11 in. paper) .............................................................. 300*
* 8.5 in. x11 in., 20lb., (75g) paper at 120V, 60 Hz, 9.5Amps; heavier paper, humidity or
other than rated voltage may reduce capacity.
A. Control Panel (see below)
B. Shredder Drawer
C. Casters
D. Disconnect Power Switch
1. OFF
2. ON
E. See Safety Instructions
(inside drawer)
F. Bin Door
G. Bin (inside)
1. Overheat (red)
2. Remove Paper (red)
3. Bin Full (red)
4. Drawer/Bin Door
Open (red)
5. Time Delay (blue)
6. Smart Lock
TM
(blue)
7. Start (blue)
8. On/Off (blue)
*300C does not include time delay feature.
8-1/2“ x 11” paper 8-1/2“ x 14” paper
(200 sheets)
Staples
CD/DVD
A.
B.
D.
F.
E.
G.
C.
20+ Sheets Stapled – Pull
apart stapled stacks of
paper containing more
than 20 sheets
20+ Sheets Clipped – Pull
apart clipped stacks of
paper containing more than
20 sheets
An occasional CD or DVD
is acceptable. Interlace
the CD or DVD within a
standard paper stack
Materials smaller that
8.5” x 11”, interlace small
sheets, mailers and credit
cards in between standard
sheets
SHREDDING MIXED MEDIA
WILL SHRED
Paper clips
Credit cards
Messy stack of paper
Junk mail
Crumpled paper
4.
5. 6. 8.
1. 2. 3.
500C
7.