Fellowes 220-2 Chipper User Manual


 
7
Fellowes conducts extensive testing to ensure that these shredders are capable of meeting all of the specifications listed
in the Product Profile (see page 2). However, the actual sheet capacity is dependent on a number of factors including
the type and weight of paper, the humidity, the voltage level of the power source, the temperature of the motor, and the
care with which the operator feeds the paper. Safety agency testing is conducted to ensure that the shredder will oper-
ate to specifications even if the available voltage is 10% below or 6% above the rated voltage. During this testing 2.5
minutes was taken to empty the basket each time it filled and the following capacities were used for temperature rise
testing:
Cut Size Number Paper Size
Voltage Hertz & Type of Sheets & Weight
220-240VAC 50HZ 3.9mm Strip Cut 17 A4 70g.
220-240VAC 50HZ 5.8mm Strip Cut 19 A4 70g.
220-240VAC 50HZ 3.9mm Confetti Cut 13 A4 70g.
120V 60Hz 5.8mm Strip Cut 19 8.5x11 20 lb.
120V 60Hz 3.9mm Confetti Cut 13 8.5x11 20 lb.
100V 50/60Hz 3.9mm Strip Cut 17 A4 70g.
100V 50/60Hz 3.9mm Confetti Cut 13 A4 70g.
Warranty
Fellowes, Inc. (“Fellowes") warrants the cutting cylinders of the machine to be free from defects in
material and workmanship for 20 years from the date of purchase by the original consumer. Fellowes
warrants all other parts of the machine to be free of defects in material and workmanship for 2 years
from the date of purchase by the original consumer. If any part is found to be defective during the
warrant period, your sole and exclusive remedy will be repair or replacement, at Fellowes’ option and
expense, of the defective part.
This warranty does not apply in cases of abuse, mishandling, or unauthorized repair. ANY IMPLIED
WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE.
In no event shall Fellowes be liable for any consequential or incidental damages attributable to this
product. This warranty gives you specific legal rights. You may have other legal rights that vary from
state to state.
For more detail or to obtain service under this warranty, please contact the appropriate location listed
in the Contact for Service section of this instruction manual.
Warrantor: Fellowes, Inc.
6
Troubleshooting
If there is a problem with your shredder, check these symptoms and remedies. If you cannot solve the
problem, call your local dealer or contact Fellowes directly.
Do not open shredder head
to attempt
repair. You could be exposed to serious electric shock and will void the warranty.
Symptom
Ready Light (G) will not light
Shredder does not start or stops while shredding
Door ajar light (K) is on
Basket full light (J) is on
Paper jam light (I) is on
Confetti-cut shredder (220C-2/C-220C) Shredder
sheet capacity decreases, noise level increases, or
cutting cylinders stop with a squeak or rubbing
sound
Shredder runs for a few seconds after the paper
has cleared the cutters
Remedy
Make sure shredder is plugged in.
Press the automatic button [I].
• Make sure shredder is plugged in.
Check Troubleshooting lights.
• Shredder is jammed. Follow the
instructions under
Operation
.
Make sure the cabinet door (A) is closed.
Empty the waste basket. Follow the instructions
under
Operation
.
Clear the paper jam. Follow the
instructions under
Operation
.
Oil the cutting cylinders. Follow the instructions
under
Maintenance
.
No action required. This is a self-cleaning func-
tion.
Supplies
The following items for the 220-2/C-220 and 220C-2/C-220C shredders are available from
Fellowes:
Item Quantity Part Number
Waste bags (in dispenser) 50/roll 36054
Waste basket (box) 1 box 31731
Powershred Lubricant
(220C-2/C-220C) 12 oz. bottle 32250
To purchase supplies, contact Fellowes at the appropriate location listed on the back page of this
instruction manual, or visit us at
www.fellowes.com
.