Filter
Top Products
GETTING TO KNOW YOUR HEDGE TRIMMER OPERATING INSTRUCTIONS
Extension Handle Adjustment
The handle length on this unit can be
varied allowing you to reach difficult
places without the use of a ladder.
To adjust the length:
1. Grip the head of the hedge trimmer
firmly and lift the extension handle
lock. (Fig. 1)
2. Pull the extension handle to the
desired length.
3. When you have the length that you
want, press the handle lock down
firmly to lock the extension handle in
place. (Fig. 1)
4. When you have finished using the
hedge trimmer, lift the extension
handle lock and retract the handle
before storing.
Fig. 1
Extension
Handle Lock
WARNING: Remove the plug
from the power source before
making adjustments to the hedge
trimmer. This will help prevent
accidental starting of the unit which
could result in serious injury.
Safety
Switch
Handle
Trigger
Fig. 2
1. Rear Handle
2. Handle Trigger
3. Safety Switch
4. Extension Handle
5. Front Hand Grip
6. Extension Handle Lock
7. Head Angle Release Button
8. Safety Guard
9. Blades
10. Blade Cover
11. Cord Holder
12. Power Cord
Illustrations may differ from actual product.
Starting & Stopping The Hedge
Trimmer
The Hedge Trimmer is designed with a
safety switch to prevent accidental
starting of the unit.
To start the hedge trimmer:
1. Remove the blade cover.
2. Connect the power plug into the
electrical outlet.
3. Press the and hold the safety switch
on the side of the handle, then press
the handle trigger. (Fig. 2)
4. Continue to press on the handle
trigger and release the safety switch.
5. To stop the blades, release the
handle trigger.
IMPORTANT: When releasing the handle
trigger, wait for the blades to stop
completely before removing your hands
from the handle.
Technical Specifications
Voltage: 120V., 60Hz.
Power: .65 Amp
4 5